Getting Started
English 6
Sealed Gas Burners
The cooktop has sealed gas burners. As a result, there are no parts under the
cooktop to clean, disassemble or adjust. Spills stay on top of the cooktop where
they are easier to wipe up.
Burner Caps
The cooktop has four burner caps. Match the size of the burner cap to the size of
the burner. Burner caps are not interchangeable.
Make sure the burner cap is completely seated on the burner base before
attempting to light the burner. If the burner cap is not placed correctly, the burner
may not light or the flame may not burn completely or correctly.
Burner Grates
Warning:
To prevent flare-ups, do not use the cooktop without all burner
caps and all burner grates properly positions. Do not use a grate if the feet
are missing or damaged.
There are two burner grates: one for the left side of the cooktop and one for the
right side of the cooktop. Position them so that the circular opening is over the
burner cap. Burner grates should rest flat on the cooktop. The rubber feet on the
grates should rest in the indents on the cooktop.
Electronic Ignitor
The cooktop uses electronic ignitors to light the burners, There is no pilot light.
Each burner has its own ignitor. For proper operation, keep the ignitor clean and
dry. It is necessary to clean these when there is a boilover or when the burner
does not light even though the ignitor clicks.
Caution:
All ignitors spark when any single burner is turned on. Do not
touch any of the burners when the cooktop is in use.
Figure 2: Right Side Burner - Side View
Burner Grate
Burner Cap
Burner
Cooktop
Ignitor
Figure 3: Grates for Free-standing Models
Left Side
Burner Grate
Right Side
Burner Grate