If the plug is not suitable for your socket outlets, it should be
cut off and an appropriate plug fitted in its place by an au-
thorised customer service agent. The replacement plug
should have the same fuse rating as the original plug.
The severed plug must be disposed of to avoid a possible
shock hazard and should never be inserted into a mains
socket elsewhere.
Symbols
The following symbols may provide you with important in-
formation pertaining to the use of your dust extractor. Please
take note of these symbols and their meaning. Correctly in-
terpreting the symbols will help you to operate the dust ex-
tractor more effectively and safely.
Symbols and their Meaning
WARNING! Read all the safety and general instructions.
Failure to observe the
safety and general instructions may result in electric shock, fire and/or serious injury.
Vacuum cleaner from dust class L in accordance with IEC/EN 60335-2-69 for the
dry
vacuuming
of harmful dust with an exposure limit > 1 mg/m
3
Do not hang the vacuum cleaner on a crane hook, e.g. in order to
transport it.
The vacuum cleaner is not suitable for moving with a
crane. There is a risk of injury and damage if you do this.
Do not sit or stand on the vacuum cleaner.
The vacuum cleaner may
tip over and become damaged if you do this. This poses a risk of injury.
GAS 12-25 L
Switching off
Vacuuming
Vacuuming up dust deposits
GAS 12-25 PL
Automatic start/stop
Extracting dust that accumulates from working power tools
The vacuum cleaner switches on automatically and off again with a time
delay
Switching off
Vacuuming
Vacuuming up dust deposits
Permitted connected load of the connected power tool (country-specific)
Product description and
specifications
Intended Use
The tool is intended for collecting, vacuuming, conveying
and separating non-flammable dry dust types, non-flam-
mable liquids and a mixture of water and air. The dust extrac-
tion capability of the dust extractor has been tested and cor-
responds to dust class L. It is suitable for the increased de-
mands in professional use, e.g. in trade, industry and work-
shops.
Dust extractors from dust class L in accordance with IEC/EN
60335-2-69 may only be used to vacuum and extract harm-
ful dust with an exposure limit of > 1 mg/m
3
.
English |
9
Bosch Power Tools
1 609 92A 4NC | (14.08.2018)