16
| English
The measured value of the angle
w
between the base leg and fold-out leg is
indicated in the display. The required angle
v
between the base leg and leg
extension is calculated as follows:
v
= 180° –
w
v
w
v
GAM 220 MF: "Simple Mitre" Operating Mode
The "Simple mitre" measurement is used to calculate the cutting angle
MTR
when two workpieces with the same mitre have to form any outer angle
x°
smaller than 180° (e.g. for skirting boards, banister columns or picture
frames).
The "simple mitre" operating mode is activated by pressing the but-
ton
MTR1
(14)
. The displayed value is always used for the calculation of the
MTR
. If a saved value is being displayed (indicator
(a)
flashes), the calcula-
tion will be performed with the saved value regardless of the position of the
legs.
x°
When workpieces are to be fitted into a corner (e.g. for skirting boards),
measure the corner angle
x°
by positioning the fold-out leg and the base leg.
For given angles (e.g. picture frames), open the fold-out leg and the base leg
until the required angle is indicated in the display.
x°
x°
MTR
MTR
The mitre angle
MTR
, by which the two workpieces are to be shortened, is
calculated. For these mitre/bevel cuts, the saw blade is perpendicular to the
workpiece (the bevel angle is 0°).
MTR
Press the button
MTR1
(14)
. The calculated horizontal mitre angle
MTR
,
which has to be set on the chop and mitre saw, and the indicator
MTR
will be
shown on the display.
1 609 92A 58K | (18.11.2019)
Bosch Power Tools
