Bosch FLEXIDOME corner 9000 MP, Руководство пользователя программного обеспечения

Страница: 66 / 108

66 en | Recording Camera Browser Interface
AM18-Q0649 | v5.8 | 2013.06 Software manual Bosch Security Systems
10.2.1 Recording track selection
Standard and alarm recording can be defined for the two
recording tracks. You must first select the track before setting
up the standard and alarm recording parameters.
1. Click the Recording 1 entry in the list.
2. Set up the standard and alarm recording parameters for
track 1 as described below.
3. Click the Recording 2 entry in the list.
4. Set up the standard and alarm recording parameters for
track 2 as described below.
Recording includes
Specify whether, in addition to video data, audio or metadata
(for example alarms or VCA data) should also be recorded. (To
change the global audio format, click the audio recording
format link.)
Note:
Including metadata could make subsequent searches of
recordings easier but it requires additional memory capacity.
Without metadata, it is not possible to include video content
analysis in recordings.
10.2.2 Standard recording
Select the mode for standard recordings:
– Continuous : the recording proceeds continuously. If the
maximum recording capacity is reached, older recordings
are overwritten automatically.
– Pre-alarm : recording takes place in the pre-alarm time,
during the alarm and during the post-alarm time only.
– Off : no automatic recording takes place.
Stream
Select the stream to be used for standard recordings:
– Stream 1
– Stream 2
– I-frames only