Bosch F.01U.393.108 F.01U.393.109, Руководство по установке

Страница: 36 / 52

36 en | Troubleshooting FLEXIDOME IP indoor 8000i
2021-08 | 01 |
Installation manual
Bosch Security Systems B.V.
Closing seals are damaged. Please contact your supplier or
system integrator, or go directly
to Bosch Security Systems
customer service.
Rubber grommet not placed
correctly on IP54 protection
kit.. Re-install rubber grommet.
Cable diameter or shape is not
as specified for IP54 protection
kit. Re-install camera with proper
cabling.
Air vent is blocked due to dirt/
water. Gently clean air vent..
Air vents are damaged or loose. Please contact your supplier or
system integrator, or go directly
to Bosch Security Systems
customer service.
Camera has been off for an
extensive period of time. Turn camera on and leave it on
until condensation clears.
No audio transmission to
remote station Faulty microphone cable
connection. Open camera bubble and
correctly connect microphone
connector.
Incorrect configuration. Check audio parameters on the
Audio configuration and LIVE
page functions pages.
The unit does not report
an alarm. Alarm source is not selected. Select possible alarm sources
on the Alarm sources
configuration page.
No alarm response specified. Specify the desired alarm
response on the Alarm
connections configuration page;
if necessary change the IP
address.
The unit is not
operational after a
firmware upload. Power failure during
programming by firmware file. Have the unit checked by
Customer Service and replace if
necessary.
Incorrect firmware file. Enter the IP address of the unit
followed by /main.htm in your
Web browser and repeat the
upload.
Web browser contains
empty fields. Active proxy server in network. Create a rule in the local
computer's proxy settings to
exclude local IP addresses.