19
OptiDry
™
This feature senses when the unit is low on rinse agent
and automatically increases the drying time. For best
performance, always use a liquid rinse agent even if your
detergent contains a drying additive.
Cycle Completion Signal
The cycle completion signal alerts you when a cycle
completes and the dishwasher has washed and dried the
dishes. You can choose to disable the tone or adjust the
volume.
NOTE: The unit must be powered OFF before activating.
To activate:
•
Press and hold the right “Cancel Reset” button then
press and hold the ON/OFF button.
•
When the light on the “Cancel Reset” button you are
pressing illuminates and the tone goes of, release
both buttons.
•
Press the far right “Cancel Reset” button until you
achieve the desired volume or until there is no tone
(to turn of).
•
Press the ON/OFF button. The setting is now saved.
Countdown Display
The countdown display indicates the time remaining for
a cycle to complete. The time will change based on water
temperatures and control settings.
Sanitized Indicator
When the “Sanitized” indicator light illuminates on
the control panel (or Sanitized symbol
appears in
models with a display) , it means that the dishware and
kitchenware that were just washed have been sanitized
according to the requirements of the National Sanitation
Foundation (NSF). For more information on NSF
certification, go to the Wash Cycle Information section of
this manual.
Reill Rinse Agent Indicator
An indicator light will illuminate to alert you when
more rinse agent is required. For models with a display
window, the display will show .
InfoLight
™
Red LED illuminates the loor to indicate that the
dishwasher is running.
Additional Features
The options listed below vary by models.
Extra Dry Heat
With this option you can raise the temperature of the
rinse water and increase the drying time for improved
drying.
This option is only for units with a display. If your unit has
a display window, please follow the instructions below.
NOTE: The unit must be powered OFF before activating.
To activate:
•
Press and hold the left “Cancel Reset” button, then
press and hold the ON/OFF button.
•
When the LED display window indicates a “0” or “1”
release both buttons.
•
To activate extra dry heat, press the left “Cancel Reset”
button until the display indicates “1”.
•
To disable extra dry heat, press the left “Cancel Reset”
button until the display indicates “0”.
•
Press the ON/OFF button to save the setting.
Child Lock
The child lock feature allows you to disable the
dishwasher control panel to prevent accidental program
changes.
To activate:
•
Press and hold the button labeled “Child Lock” for 4
seconds. The child lock indicator will illuminate.
To disable:
•
Press and hold the “Child Lock” button for 4 seconds.
Cancel Drain
Reset
