18
9
Dishwasher Features & Options
Wash Cycles *
* The cycles listed below vary by models.
Power Scrub/Auto Plus
Cleans items having baked-on or hard dried food soils.
These items may require soaking or hand scouring.
Designed to be used with heavily soiled dishes as well as
pots and pans.
Auto Wash
Takes the guesswork out of cycle selection. The sensors
in the dishwasher automatically adjust the cycle length,
temperature and water changes based on the soil load.
This cycle contains additional sensor decisions when
compared to other cycles.
Auto Delicate/Delicate Wash
Designed to be used with your fragile china and glassware,
allowing you to get it perfectly clean without the hassle of
hand washing or worry of damage in the dishwasher.
Regular Wash
Thoroughly cleans normal loads having loosely attached
normal soiling.
Quick Wash
Cleans lightly soiled dishes and reduces overall wash time.
Use this cycle to clean glasses and dessert dishes that may
need to be re-used at the same event.
Rinse & Hold
Allows you to rinse the food soil of of a partial load and
hold them in the dishwasher until there is a full load.
Eco Wash
Wash Cycle Options *
* The options listed below vary by models.
Options can be used along with wash cycle to customize
load for personalized results:
1. Select wash cycle
2. Select option
3. Start dishwasher
Half Load
In the Power Scrub, Regular, and Auto Wash cycles you
can reduce the energy and water consumption when
washing small, lightly soiled loads that ill approximately
half the dishwasher’s capacity.
To activate, select the Half Load button in addition to any
of the three cycles listed above.
Top Rack Only
This option allows you to save energy and water by
washing loads small enough to ill the top rack only.
EcoAction
™
This option saves energy by reducing the water
temperature.
Sanitize Option
All models are designed to sanitize the loaded dishes.
Press the Sanitize Option button to activate the Sanitation
features. The technical sanitation measures may also
improve the drying results.
Delay Start
This option allows you to delay the start time of your
dishwasher. To activate:
•
Turn the dishwasher on.
•
Select the desired wash cycle.
•
Press and hold the Delay Start button. Release
when the desired delay time is shown in the display
window.
This cycle is optimized to be even more energy eicient.
Eg. On lightly soiled loads it uses much less water and
energy than traditional cycles.
