Bosch EasyVac 3 Скачать руководство пользователя страница 13

Страница: 13 / 114

English |

Bosch Power Tools

1 609 92A 43U | (6.9.17)

Extraction of dust resulting from running power tools
(see figure D)

A socket outlet with earthing contact

is integrated in the

vacuum cleaner. An external power tool can be connected
there. Observe the maximal allowable load of the connected
power tool.

– Fit the extraction adapter

(see “Fitting the extraction

adapter or curved nozzle”, page 12).

– Insert the extraction adapter

into the dust extraction

outlet for the power tool.

Note:

When working with power tools that have a low air feed

into the vacuum hose (e.g. jigsaws, sanders, etc.), the air dif-
fuser

of the vacuum hose

must be opened. This will im-

prove the total output of the vacuum cleaner and the power
tool.
To do so, turn the ring above the air diffuser

until the max-

imum opening is produced.

– To

start the operation

of the vac, switch on the power tool

connected to the socket

. The vacuum cleaner starts au-

tomatically.

– Switch the power tool off to

end

the

vacuuming

The delayed action shutdown of the Automatic Start/Stop
continues to run for up to 6 seconds in order to extract re-
sidual dust from the vacuum hose.

Maintenance and Service

Maintenance and Cleaning



Before any work on the vacuum cleaner itself, pull the
mains plug.



For safe and proper working, always keep the vacuum
cleaner and ventilation slots clean.

If the replacement of the supply cord is necessary, this has to
be done by Bosch or an authorized Bosch service agent in or-
der to avoid a safety hazard.

Cleaning the Filter Assembly (see figures E1–E3)

– Press the release button

and pull the dust cup

out of

the vacuum cleaner.

– Remove the fabric filter

along with its filter basket and

brush down the fabric filter with a soft brush.

– Grasp the flat-fold filter

by the bars and remove it to-

gether with its filter basket.
Brush down the flat-fold filter using a soft brush or rinse it
out under running water and leave it to dry thoroughly.

– Re-insert the cleaned filters, ensuring that they are seated

correctly and securely.

Cleaning the Dust Cup

– Wipe the dust cup

from time to time using conventional,

non-abrasive detergent and then leave it to dry thoroughly.

Cleaning the permanent filter (see figure F)

Clean the permanent filter

from time to time in order to en-

sure that the vacuum cleaner continues to perform optimally.

– Open the exhaust air cover

and remove the permanent

filter

– Rinse out the permanent filter

under running water and

then leave it to dry thoroughly.

– Re-insert the cleaned filter, ensuring that it is seated cor-

rectly and securely. Close the exhaust air cover again.

Malfunctions

In the case of insufficient vacuuming performance, check the
following:
– Is the hose system clogged?
– Are the filters clogged with dust?
– Is the dust cup

full?

– Is the dust bag

full?

The vacuum cleaner switches off on overheating. Proceed as
follows:
– Leave the vacuum cleaner to cool down for 60 min.
– Briefly remove the mains plug from the socket and then re-

insert it.

– Make sure that the container

and dust bag

are empty

and that the vacuum hose

, filter

21/22

and permanent

filter

are not blocked.

Emptying at regular intervals ensures optimum vacuuming
performance.

If the vacuuming performance is not achieved thereafter, take
the vacuum cleaner to customer service.

Storage (see figure G)

– Open the elastic bands of the vacuum-hose holder

and

wrap the vacuum hose

around the vacuum cleaner.

Hook the elastic bands back in.

– Put the vacuuming accessories in the bracket

provided

for this purpose on the vacuum cleaner.

– Wind the mains cable around the cable holder

– Carry the vacuum cleaner only by the carrying handle

After-sales Service and Application Service

Our after-sales service responds to your questions concern-
ing maintenance and repair of your product as well as spare
parts. Exploded views and information on spare parts can al-
so be found under:

www.bosch-pt.com

Bosch’s application service team will gladly answer questions
concerning our products and their accessories.

In all correspondence and spare parts orders, please always
include the 10-digit article number given on the nameplate of
the product.

Great Britain

Robert Bosch Ltd. (B.S.C.)
P.O. Box 98
Broadwater Park
North Orbital Road
Denham
Uxbridge
UB 9 5HJ

– To

activate the automatic

start/stop

of the vacuum cleaner, set

the mode selector switch

to the

“Automatic Start/Stop” symbol.