34
1.4
Programming the Observation System monitor
No special programming is required for the Observation System Switcher. If using the Observation System Multiplexer, ensure that the
Record
mode is set to
Multiplexing
(verify this via the Observation System Main Menu > Settings > VCR).
1.5
Programming the DVR1
To view the DVR1’s menu screen using the Observation System Monitor:
•
On the Observation System Monitor, press
MENU > SWITCH TO PLAYBACK VIEW
•
On the Observation System DVR1:
Select
MENU > ADVANCED MENU,
then press
ENTER
Enter the correct password (default is 0000) and
ENTER
Press
ENTER
to access the
Advanced Menu
Select
MULTIPLEXER FORMAT
, then
ENTER
Select
BOSCH OBSERVATION SYSTEM
, then
ENTER
Press
MENU
twice to exit.
1.6
Remote Viewing Considerations
The following pertains to the
Remote Viewer Software
(included with the DVR1; allows Remote Viewing of video via a PC with this
software loaded).
The Ethernet port connection depends on the network configuration:
•
For a DVR1 connected directly to a Hub, use a
Straight Through
cable.
•
For a DVR1 connected directly to a PC, use a
Crossover
cable.
•
For a DVR1 connected via standard phone line (POTS) using LAN modems, refer to the Bosch Security Systems, Inc. Web site.
*
A PSTN-LAN
*
modem can be used for remote access to one of the Bosch digital products through a POTS line.
•
For a DVR1 connected via standard phone line (POTS) using standard modems, see
Section 5.7
for modem models.
A standard DB9 Female to DB25 Male modem cable will also be required for modem communications.
*
Refer to our Web site at
www.boschsecuritysystems.com
under
Tech Tips
,
#12 Applications Notes
,
3COM OfficeConnect 56K LAN Modem
.
Содержание DVR1EP08
Страница 8: ...8 ...
