background image

25

Disk Full Notification

This message will appear on the primary monitor to indicate
that the unit has stopped recording because the disk is full.

In 

No Overwrite 

mode, the unit will not record over

previously recorded data. To continue recording, the user
must acknowledge the 

disk full

message by pressing

ENTER

, then 

ERASE

(or 

DELETE

). 

In 

Overwrite Once

mode: The user must acknowledge the on-screen message by pressing 

ENTER

.

The unit will resume recording when the user presses 

RECORD

.

6.3

Playback

Figure 6B - LCD during Playback

Play Forward

To begin normal playback in the forward direction, press 

Play Forward

.

Playback is indicated via the following:

• 

PLAY

appears briefly in the upper left-hand corner of the primary monitor.

• 

PLAY>

appears on the LCD.

Reverse Play

To begin reverse playback, press 

Play Reverse

. Reverse playback is indicated via the following:

• 

REVERSE PLAY

appears briefly in the upper left-hand corner of the primary monitor.

• 

PLAY<

appears on the LCD.

If there is only one recording session on the hard disk, the unit will indicate 

START OF DATA

on

the primary monitor.

Playback Speed

The unit plays back the data at the rate at which it was recorded. The user can alter the playback
speed using 

Up/Down Record Speed

Altering the playback speed overrides the speed of any incoming alarms. To clear the override, press

STOP

, then 

PLAY

to resume playback at the speed that the data was recorded. 

NOTE:

For clear audio, playback should be at the same speed at which it was recorded.

Fast Forward

During playback, pressing 

Fast Forward

allows viewing of data at a faster than normal rate. 

Fast Forward is indicated via the following:

• 

FAST FORWARD

appears briefly in the upper left-hand corner of the primary monitor.

• 

FFWD

appears on the LCD.

12:34:45A

12/17/00

PLAY

0.2p

1

2

3

4

1.  

Time the Data was Recorded

2.  

Date the Data was Recorded

     

(If the letter 

A

 precedes the

     record rate, the unit is configured to 
     record or play back audio).

3.  

Play Forward Mode Indicated

4.  

Normal Record Speed in

     Pictures per Second  

MESSAGE

DISK FULL. RECORDING HAS STOPPED.

[OK]

PLAY FWD

Play Forward

Button

PLAY REV

Play Reverse

Button

REC SPD

Record Speed

Buttons

Fast Forward

Button

Содержание DVR1EP08









































Отзывы: