manualshive.com logo in svg

Bosch DSDA ISCSI DISK ARRAY SERIES DSA-N2B20, Руководство по установке

Поделиться
Скачать
Bosch DSDA ISCSI DISK ARRAY SERIES DSA-N2B20 Скачать руководство пользователя страница 15

DSDA iSCSI Disk Array Series

Configuration through the Web Interface | en

13

Bosch Security Systems

Installation Guide

 V 1 | 2008.08

27. The changes are summarized on the 

Commit

 screen. 

Click 

Commit

 to apply the new settings.

By default, one disk is left as a spare disk. If no spare disk is needed, this disk can be 

added to the volume manually. To do so, please continue with step 28.

If you would like to keep the spare disk, please continue with step 32.

28. In the navigation panel, select 

Filer

 > 

Use Command Line

.

29. Enter 

vol add vol0 1

 (or replace vol0 with the volume to which you want to add the disk).

30. A warning displays. Enter 

y

 (yes) to confirm the action.

A message confirms that the disk has been added.

31. Click 

Disconnect

 to disconnect from the command line console.

!

CAUTION! 

If the settings made here are altered later, all data stored on the disks is lost as the RAID 

group needs to be reconstructed.

Содержание DSDA ISCSI DISK ARRAY SERIES DSA-N2B20









































Отзывы:

Нет отзывов

Бренды по названию

Популярные бренды

Загрузить еще бренды