DS7446KP
|
User Guide | 11.0
Optional Commands
Bosch Security Systems | 12/04 | 4998149924B
33
11.7 Auto
Forward
[# Command][8][2] – Enable Auto Forward
[# Command][8][3] – Auto Forward On Setup
[# Command][8][4] – Auto Forward Off Setup
Auto Forward allows you to forward incoming calls to a telephone
number of your choice after you turn the system All On.
Forwarding incoming calls to another telephone number keeps the
telephone line that is connected to your security system open in case an
emergency occurs that requires your system to contact your ARC.
You must have call forwarding service from your local telephone
company to use this command.
Follow these steps to use Auto Forward:
1.
Press [# Command][8][3].
2.
Press [Bypass].
You can now enter the telephone number that all incoming calls are
forwarded to when you turn your system All On. Refer to Table 17 for
special keypad key functions.
Table 17: Auto Forward Key Functions
Key Function
[A]
Moves the cursor one space to the left.
[B]
Deleted the selected digit.
[C]
Moves the cursor one space to the right.
[On]
Enters a pause. A “p” appears in the sequence.
[Perimeter]
Enters a flash (on-hook, pause, off-hook). Appears as an “f” in the
sequence.
[*]
Performs the function assigned by your phone service provider.
[#]
Performs the function assigned by your phone service provider.
3.
Press [Bypass] again after all digits are entered.
4.
Press and hold [# Command] to exit this command.
5.
Press [# Command][8][4].
