DS7446KP
|
User Guide | 11.0 Optional Commands
30
Bosch Security Systems | 12/04 | 4998149924B
4.
Press [#][Command] after you select a Chime tone. The selected tone
sounds for all Chime zones.
5.
Press [# Command][6][1] to enable Chime Mode.
-
Press [1] to turn Chime Mode on
-
Press [2] to turn Chime Mode off
6.
Press [#][Command] after you enable Chime Mode.
11.2 Change
Skeds
[# Command][5][2]
A sked is a scheduling command that allows a selected event to occur at a
specific time. For example, if you need your system to turn All On at a
certain time on certain days, your alarm company can set up a sked to
meet this need. A sked can also turn an output on or off, such as lighting
or a pool pump, when needed.
Follow these steps to change a sked:
1.
Press [# Command][5][2], and then select a sked type to change.
Refer to Table 15.
Table 15: Change Sked Options
Key Option
[1]
Change All On Skeds
[2]
Change Perimeter On Skeds
[3]
Change Partial On Skeds
[4]
Change Off Skeds
[5]
Change Output On Skeds
[6]
Change Output Off Skeds
2.
Enter the time to turn the sked on or off in HH:MM format.
The valid range is 00:00 to 23:59. To disable a sked, enter 00:00 for
the time.
3.
Identify which days the sked operates.
To add or remove a day, press the corresponding numeric key. Refer
to Table 16.
