11
Installation of the Rubber Drain Hose
Adaptor
1
Obtain the Rubber Drain Hose Adaptor and the two
hose clamps from the Dishwasher Installation Kit.
2
On one outside end of the Rubber Drain Hose Adapter
is a raised groove. Insert the drain hose into the
end
without the raised groove.
Be sure to fully insert the
drain hose.
3
Secure the connection with the Silver Spring Clamp.
4
Use the Gold Screw Clamp to attach the Rubber Drain
Hose Adaptor to the house plumbing.
Connecting the Drain Hose to the
Household Plumbing
The dishwasher drain hose may be connected to the drain
plumbing in one of four ways:
1
Directly to the undersink dishwasher drain connection,
as shown in
Figure 23
.
2
Directly to a disposer dishwasher drain connection, as
shown in
Figure 24
.
3
To the undersink dishwasher drain connection through
an air gap, as shown in
Figure 25
.
4
To a disposer dishwasher drain connection through an
air gap, as shown on
Figure 26
.
Information on installing air gaps and disposers can be
found in the
Plumbing Preparation
section of this
manual.
NOTE:
If the dishwasher drain hose is to be connected to
a disposer dishwasher drain connection, remove the plug
from the disposer’s dishwasher drain connection.
Use the supplied Rubber Drain Hose Adaptor and Drain
Hose Clamps to connect the dishwasher drain hose to the
plumbing drain connection. Use the spring clamp to
secure the Rubber Drain Hose Adaptor to the dishwasher
drain hose. Use the screw clamp to secure the Rubber
Drain Hose Adaptor to the plumbing drain connection.
The dishwasher drain hose must have one place along its
length that is securely attached 20 inches above the
cabinet floor.
Figure 25
Figure 26
Figure 23
Figure 24
Drain Hose Connection
Silver
Spring
Clamp
Gold
Screw
Clamp
