DIVAR IP all-in-one 7000 2U
System setup | en
27
Bosch Security Systems B.V.
Quick installation guide
2021.10 | V02 | DOC
12. Click
Next
to continue.
The Create Virtual Drive - Virtual drive settings
dialog box is displayed.
13. Apply the following settings:
–
Initialization state:
Fast Initialization
–
Strip size:
64 KB
–
Write policy:
Always Write Back
Note:
Keep all other settings unchanged.
14. Click
Create Virtual Drive
.
The virtual drive is created.
15. Click
Next
to continue.
The
Create Virtual Drive - Summary
dialog box is displayed.
16. Check the settings for the virtual drive configuration.
17. Click
Finish
to accept the settings and to complete the configuration.
The virtual drive will be created and initialized.
18. Exit the
MegaRAID Storage Manager
application.
19. Perform a complete system recovery (Initial Factory Setup).
8.4.2
Recovering the unit
Following procedure describes how to restore the factory default image.
To restore the unit to factory default image:
1.
Start the unit and press
F7
during the BIOS power-on-self-test to enter Windows PE.
The Recovery menu is displayed.
2.
Select one of the following options:
–
Initial Factory Setup (all data on system will be lost):
This option deletes data on all
HDD partitions and overwrites the operating system partition with the factory default
image.
–
Initial Factory Setup (overwriting existing data):
This option deletes and overwrites
data on all HDD partitions. Furthermore, it overwrites the operating system partition
with the factory default image.
Note:
This procedure might take very long.
–
System Recovery (back to Factory Defaults):
This option overwrites the operating
system partition with the factory default image and imports existing virtual hard
drives from the HDDs during recovery.
Note:
The
System Recovery
option does not delete video footage that is stored on the data
HDDs. However, it replaces the complete operating system partition (including the video
management system settings) with a default configuration. To access existing video
footage after recovery, the video management system configuration needs to be exported
before the system recovery and re-imported afterwards.
i
Notice!
Do not turn off the unit during the process. This will damage the recovery media.
3.
The unit starts from the recovery media. If the setup is successful, press
Yes
to restart
the system.
4.
Windows performs the initial setup of the operating system.
After Windows has completed the setup, the unit restarts.
5.
After the restart of the unit, the factory settings are installed.
