Bosch Dinion2X NBN-498 Скачать руководство пользователя страница 7

Страница: 7 / 62

Dinion2X

Safety | en

Bosch Security Systems

Installation Manual

AR18-08-B013 | v1.0 | 2009.03

recommend connecting system ground to safety ground unless

it is explicitly required. However, if the system ground and

safety ground are connected and grounding loops are causing

interference in the video signal, use an isolation transformer

(available separately from Bosch).

1.4

FCC information

This equipment has been tested and found to comply with the

limits for a

Class B

digital device, pursuant to

part 15

of the

FCC Rules. These limits are designed to provide reasonable

protection against harmful interference in a

residential

installation

. This equipment generates, uses and can radiate

radio frequency energy and, if not installed and used in

accordance with the instructions, may cause harmful

interference to radio communications. However, there is no

guarantee that interference will not occur in a particular

installation. If this equipment does cause harmful interference

to radio or television reception, which can be determined by

turning the equipment off and on, the user is encouraged to try

to correct the interference by one or more of the following

measures:

–

Reorient or relocate the receiving antenna.

–

Increase the separation between the equipment and

receiver.

–

Connect the equipment into an outlet on a circuit different

from that to which the receiver is connected.

–

Consult the dealer or an experienced radio/ TV technician

for help.

Note

Any change or modification of the equipment not expressly

approved by Bosch could void the user's authority to operate

the equipment.

CAUTION!

Connecting System ground to Safety ground may result in

ground loops that can disrupt the CCTV system.

Содержание Dinion2X NBN-498































































Результаты поиска

Содержание Dinion2X NBN-498

Отзывы:

Похожие инструкции для Dinion2X NBN-498

Бренды по названию

Популярные бренды

Bosch Dinion2X NBN-498, Руководство по установке

Результаты поиска

Содержание Dinion2X NBN-498

Отзывы:

Похожие инструкции для Dinion2X NBN-498

Бренды по названию

Популярные бренды