Bosch Dinion XF LTC 0485 series, Руководство по установке

Страница: 22 / 31

Dinion XF | Installation Manual
Bosch Security Systems | 2003-10 | V0.5
EN | 22
Note
If VMD areas overlap, motion is only detected in the area with the lowest
sequence number.
Defaults submenu
AREA 1, 2, 3, 4,
Select submenu • It is possible to set 4 motion sensitive areas (per
MODE).
• Press SELECT to enter the area set-up menu.
ACTIVE ON, OFF Every area can be enabled individually by
selecting YES.
MOTION Press SELECT to
reset indicator Indicates the peak of measured motion in the
selected area
SENS Use the LEFT/RIGHT keys to set the SENSitivity
for motion to the desired level. Motion above this
level triggers alarm.
EXIT Return to MODE menu
Function Selection Description
MODE
DEFAULTS Select to restore the factory defaults. A
confirmation screen appears. Allow 5 seconds for
the camera to optimize the picture after a mode
reset.
EXIT Return to MODE menu