Bosch DFS097E50A, Инструкция по установке и эксплуатации

Страница: 10 / 20

en
Customer service
10
4
Customer service
Customer service
When calling us, please give the product number (E
no.) and the production number (FD no.) so that we can
provide you with the correct advice. The rating plate
with these numbers can be found inside the appliance
(remove the metal mesh grease filter to gain access).
You can make a note of the numbers of your appliance
and the telephone number of the after-sales service in
the space below to save time should it be required.
Please be aware that a visit by an after-sales engineer
will be charged if a problem turns out to be the result of
operator error, even during the warranty period.
Please find the contact data of all countries in the
enclosed customer service list.
To book an engineer visit and product advice
Rely on the professionalism of the manufacturer. You
can therefore be sure that the repair is carried out by
trained service technicians who carry original spare
parts for your appliances.
Accessories
(not included in the scope of delivery)
Note:
These instructions apply to several appliance
models. It may be the case that an optional accessory
that is listed does not apply for your appliance.
Note:
Observe the installation instructions in the
accessory.
--------
E no. FD no.
After-sales service O
GB
0344 892 8979
Calls charged at local or mobile rate.
IE
01450 2655
0.03 € per minute at peak. Off peak 0.0088 €
per minute.
Accessory Order number
Basic equipment:
Starter set for circulating-air mode
Throw-away filter for starter set DSZ4565
DSZ4561
Basic equipment:
CleanAir air recirculation module
Throw-away filter for CleanAir recirculation mod-
ule
DSZ4680
DSZ4681
Lowering frame:
Appliance width: 60 mm DSZ4660
Lowering frame:
Appliance width: 90 cm DSZ4960
Installation set:
Upper cabinet: 90 cm DSZ4920
Handle strip 60 cm (no cut out):
Stainless steel
White
Black DSZ4655
DSZ4652
DSZ4656
Handle strip 90 cm (no control panel cut-out):
Stainless steel
White
Black DSZ4955
DSZ4952
DSZ4956
Handle strip 60 cm (with control panel cut-
out):
Stainless steel (for control panel variant 1)
Stainless steel (for control panel variant 2)
DSZ4665
DSZ4675
Handle strip 90 cm (with control panel cut-out):
Stainless steel (for operating unit, variant 1)
Stainless steel (for operating unit, variant 2) DSZ4965
DSZ4975