Bosch DECT6000, Руководство по установке

Страница: 12 / 48

4.3 Installation
4.3.1 Mounting procedure
The DCU can be used as a tabletop or can be mounted on a wall.
To mount a DCU to a wall the following steps have to be carried out:
1. Mark the drill spots on the wall. Use the bracket as drawing mould.
2. Drill 4 holes of 6 mm on the marked drill spots.
3. Place the plugs in the holes.
4. Mount the bracket to the wall using four screws.
5. Place the DCU on the bracket.
4.3.2 Hardware configuration of the DCU
The hardware configuration of the DCU depends on the number of handsets and base
stations that are used in the system.
4.3.3 Installing an ACU
The DCU must be equipped with at least one and maximum 8 ACUs to communicate
with the PABX.
For information about how to install an ACU see chapter 6.
4.3.4 Installing an extension card
The DCU can be equipped with an extension card to connect 8 extra base stations.
For information about how to install an extension card see chapter 8.
CHAPTER 4
Installation Instructions
8 DECT6000
9922
141
80271
03-07
en
DCU configuration Maximum number
of base stations Maximum number
of ACUs Maximum number
of handsets
(ACU x 8)
1 DCU 8 8 64
1 DCU + extension card 16 8 64
2 DCUs (linked system) 16 16 128
2 DCUs (linked system) +
1 extension card 24 16 128
2 DCUs (linked system) +
2 extension cards 32 16 128
Table 4.1 DCU configurations