Control Panel
D7212GV2
Release Notes for Version 7.07
December 2007
Trademarks
Molex
®
is a registered trademark of Molex Incorporated.
1.0 Requirements
Table 1: Required Handlers
D5200 Handler
Version
Changes
GV2MAIN
1.03
New handler for the GV2 Series Control Panels, version 7.07 and later
RADXUSR1
1.06
Updated to support GV2 Series Control Panels
RADXPNTS
1.08
Updated to support GV2 Series Control Panels, version 7.05 and later
RADXSKED
1.04
Updated to support GV2 Series Control Panels
GV2AUX
1.03
New handler for the GV2 Series Control Panels, version 7.07 and later
9000MAIN NA
Not compatible
with the GV2 Series Control Panels
RADXAUX1
NA
Not compatible
with the GV2 Series Control Panels
During the development of the GV2 Series
Control Panels, some D5200 Handler
version numbers were skipped. The
following version numbers were not
released.
GV2MAIN v1.01
RADXUSR1 v1.05
RADXPNTS v1.07
RADXSKED v1.03
GV2AUX v1.01
Table 2: Supporting Literature for D7212GV2
with Version 7.07 Firmware and Later
Document Name
Part Number*
D7212GV2 Program Entry Guide
F01U003804-03
D7212GV2 Program Record Sheet
F01U003803-03
D7212GV2 Operation and
Installation Guide
F01U003805-02
D7212GV2 Approved Applications
Compliance Guide
F01U003806-02
* Older revisions have alphabetic revision identifiers (for
example, F01U003804
B
) and do not provide information
that supports version 7.05 and later firmware.
Use Remote Programming Software
(RPS) version 5.7 and later with this
software version.
To acquire an update for your D5200
Programmer, call the Bosch Security
Systems, Inc. Handler Update System,
toll-free, at (800) 657-4584. Make a
separate phone call for each handler.
Use an analog telephone line with the
D5200. The D5200 dials only pulses.
Refer to
Section 10 Updating Handlers
in
the
D5200 Programming Manual
(P/N: 74-06176-000-B) for details on
updating handlers.
Refer to
Table 3
for the required ROM kit part
number.
Table 3: ROM Kit Part Number
Control Panel Model
Part Number
D7212GV2
R20-7212V2-ROM
