Bosch CTL636E SERIES, Инструкция по эксплуатации

Страница: 48 / 136

44
en Preparation using ground coffee
The milk is dispensed into the cup or glass
first. Then the coffee is brewed and runs
into the cup or glass
Press
C
again to stop the current step of
the process prematurely
Milk froth or warm milk
■ Place a cup or glass underneath the
beverage outlet
■ Turn the control ring and select
“Milk froth”
or
“Warm milk”
F
The settings can be changed as
described in the section “Drink
adjustment”
■ Press
C
to start dispensing
Milk froth or warm milk is dispensed from
the beverage outlet
Press
C
again to prematurely halt the
dispensing process
Preparation using
ground coffee
F
When using ground coffee, the
setting for the strength of the coffee
and dispensing two cups at once is
not available
Important: Remove cups or
glasses before opening the door
in case they fall
The appliance must be ready for use
■ Open the appliance door
■ Remove the ground coffee drawer.
The removable drawer must be dry
■ Put in coffee powder (maximum 2 level
measuring spoons); do not press firmly.
F
Caution!
Do not use whole beans or instant
coffee
■ Replace the ground coffee drawer.
■ Close the appliance door
F
If coffee is not dispensed within
90 seconds, the brewing chamber
empties automatically to avoid an
overflow The appliance is then
rinsed
■ Place a cup underneath the beverage
outlet
■ Turn the control ring and select a coffee
drink or a coffee drink with milk
The display shows the selected drink, a
measuring spoon and the preset values for
this drink
F
The settings can be changed as
described in the section “Drink
adjustment”
For coffee drinks with milk, please
observe the instructions in the
section “Preparation using milk”
■ Press
C
to start dispensing
The coffee is brewed and then dispensed
into the cup When selecting coffee drinks
with milk, the milk is first dispensed and
then the coffee brewed
F
For another drink with ground coffee,
repeat the procedure
Dispensing hot water
B
Risk of burns!
The beverage outlet gets very hot
After use, always let it cool down
before you touch it
The appliance must be ready for use
■ Remove the milk tube from the milk
container
■ Remove any milk or coffee residue from
the outlet
■ Place a cup or glass underneath the
beverage outlet
■ Turn the control ring and select
“Hot water”
F
The settings can be changed as
described in the section “Drink
adjustment”
■ Press
C
to start dispensing
■ The message appears
“Milk hose
separated from milk container?”
■ If still connected, remove the milk tube
and touch
[ Yes ]
on the display
Hot water flows out of the beverage outlet.
Press
C
again to prematurely halt the
dispensing process