Connect S2 | Solar Frame
| User Guide
© Robert Bosch Manufacturing Solutions GmbH
Bosch Connected Industry
24 |
39
8
Operation and maintenance
Device Status
Device status information can be taken from the status LED:
Maintenance
The Connect Gateway is maintenance-free. When using the Solar Frame, we recommend an annual cleaning of the solar
cells with water and a mild detergent necessary to maintain the full performance of the solar cells.
Switch off
The Connect Gateway has no shutdown switch. The device can only be switched off remotely by support.
INFO
Connect Gateways must be switched off during flight!
9
Support
For further questions please contact Nexeed Track and Trace support at the following e-mail address:
LED signal
Battery status
Blinking green
Interval
of 1 s
The device is in standby mode.
Blinking red
Interval
of 1 s
The device is in operation: scanning, position
determination or uploading data.
Blinking red
Interval
of 15 s
The battery is almost empty. The device is in battery
saving mode. No operation is possible.
Blinking green
Interval
of 30 s
The device is switched off. No operation. Battery okay.
Start the device via NFC activation.
Blinking red
Interval
of 30 s
The device is switched off. No operation. The battery is
almost empty. The device can be started after charging.
No signal
-
The battery is empty. The device is offline. Charge the
device.
Green
constant
Power supply with ≥ 18 VDC connected.
The battery is charging. Battery status > 90%.
Red
constant
Power supply with ≥ 18 VDC connected.
The battery is charging. Battery status < 90%.
