background image

en

    Programme default settings

14

0

Programme default 

settings

Pr

ogr

amme 

def

aul

set

ti

ngs

The spin speed and programme 

duration ("Ready in" time) for all 

programmes are preset at the factory.
These are displayed in the display panel 

after selecting the programme.
You can change the default settings as 

follows.

0

 Spin speed 

Before and while the selected 

programme is running, the spin speed 

or 

$

 (without final spin, laundry soaks 

in the last rinsing water, display panel - -

 -) can be set. The effects depend on 

the programme progress.
The maximum selectable spin speed 

depends on the model and the set 

programme.

~

 Page 12

Finished in 

When you select the programme, the 

relevant programme duration is 

displayed.
The programme duration is 

automatically adjusted when the 

programme is running. Changes to the 

programme default settings or 

programme settings also change the 

programme duration.
Before starting the programme, the 

programme end ("Finished in" time) can 

be preselected in increments of one 

hour (h = hours) up to a maximum of 24 

hours. 
To do this, repeatedly press the 

corresponding button until the required 

setting is displayed.

Note:  

The programme duration is 

included in the selected "Finished in" 

time.

After the start, the preselected time e.g. 

8 h

 is displayed and the time counts 

down to the start of the washing 

programme. The programme duration is 

then displayed, e.g. 

2:30

 

(hours:minutes).

Changing the preselected time:

You can change the preselected time 

after the start of the programme as 

follows:

1.

Press the 

Finished in

 button 

repeatedly until the required number 

of hours is displayed. 

2.

Press the 

Start

/Reload button.

Adding laundry while the preselected 

time continues running:

1.

Press Start/

Reload

.

2.

YES

 lights up in the display panel. 

The washing machine door can be 

opened and you can add laundry.

3.

Close the washing machine door.

4.

Press the 

Start

/Reload button. The 

preselected time continues to run.

\

Additional programme 

settings

Add

it

ion

al

 

pr

ogr

amme 

set

ti

ngs

 

Speed*

For washing in a shorter time with a 

washing result comparable to that of the 

standard programme. 

Note:  

Do not exceed the maximum 

load.

Overview of programmes 

~

 Page 12

Eco*

For saving energy with a washing result 

comparable to that of the standard 

programme.

Содержание Classixx 7 WAE28369





































Отзывы: