en
Cleaning and servicing
16
Setting
Selection
Lighting
Switched on during
operation
1
Switched off during oper-
ation
Operating mode on start-
up
Heating functions
1
AutoPilot
Night-time dimming
Off
1
On
Brand logo
Display
1
Do not display
Fan run-on time
Recommended
1
Minimum
Factory settings
Restore
Do not restore
1
1
Factory setting (may vary according to model)
11.2 Changing the basic settings
Requirement:
The appliance must be switched off.
1.
Press and hold for approx. 3 seconds.
2.
Press to confirm the notification on the display.
a
The first basic setting will now be shown on the dis-
play.
3.
Use the control ring to change the basic setting.
4.
Press .
a
The next basic setting will appear on the display.
5.
Use the button to go through the basic settings,
and make changes as required using the control
ring.
6.
Press and hold the button for approx. 3 seconds to
save your changes.
Discarding changes to the basic settings
▶
Press .
a
All your changes will be discarded and not saved.
11.3 Changing the time
You can change the time by going to the basic set-
tings.
1.
Press to switch off the appliance.
2.
Press and hold for approx. 3 seconds.
3.
Press to confirm the notification.
a
The "Language" setting appears on the display.
4.
Press .
a
The "Time" setting appears on the display.
5.
Use the control ring to change the time.
6.
Press and hold for approx. 3 seconds to confirm
the time.
12 Cleaning and servicing
To keep your appliance working efficiently for a long time, it is important to clean and maintain it carefully.
12.1 Cleaning agents
Only use cleaning products that are suitable for the dif-
ferent surfaces on your appliance.
WARNING ‒ Risk of electric shock!
An ingress of moisture can cause an electric shock.
▶
Do not use steam- or high-pressure cleaners to
clean the appliance.
ATTENTION!
Unsuitable cleaning products may damage the sur-
faces of the appliance.
▶
Do not use harsh or abrasive detergents.
▶
Do not use oven cleaner.
▶
Do not use limescale remover on the door handle or
control panel, as it may leave permanent staining.
▶
Do not use corrosive or harsh cleaning products or
products containing chlorine.
▶
Salts are very corrosive and can cause rusting. Re-
move the remnants of any acidic sauces or salted
food from the cooking compartment immediately
once it has cooled.
▶
Do not use cleaning products with a high alcohol
content.
▶
Do not use hard scouring pads or cleaning
sponges.
Appliance front
Surface
Cleaning agent
Information
Aluminium
Soapy water
Mild window-cleaning agent
After cleaning the surface, dry it with a soft
cloth.
Use a soft window cloth or a lint-free mi-
crofibre cloth to apply a mild window-clean-
ing agent to the appliance's aluminium front
and wipe it horizontally across the surface
without applying pressure.
Stainless steel
Soapy water
Special stainless steel cleaner
After cleaning the surface, dry it with a soft
cloth.
To prevent corrosion, remove any patches of
limescale, grease, starch or albumin (e.g.
egg white) on stainless steel surfaces imme-
diately.
