1 689 989 212
2014-10-31
|
Robert Bosch GmbH
14 | 1 687 010 496 | Symbols used
en
1. Symbols used
1.1
In the documentation
1.1.1
Warning notices -
Structure and meaning
Warning notices warn of dangers to the user or people
in the vicinity. Warning notices also indicate the con-
sequences of the hazard as well as preventive action.
Warning notices have the following structure:
Warning
symbol
KEY WORD – Nature and source of hazard!
Consequences of hazard in the event of fail-
ure to observe action and information given.
¶
Hazard prevention action and information.
The key word indicates the likelihood of occurrence and
the severity of the hazard in the event of non-obser-
vance:
Key word
Probability of
occurrence
Severity of danger if in-
structions not observed
DANGER
Immediate
impend-
ing
danger
Death
or
severe
injury
WARNING
Possible
impending
danger
Death
or
severe
injury
CAUTION
Possible
dangerous
situation
Minor
injury
1.1.2
Symbols in this documentation
Symbol Designation
Explanation
!
Attention
Warns about possible property damage.
i
Information
Practical hints and other
useful information.
1.
2.
Multi-step
operation
Instruction consisting of several steps.
e
One-step
operation
Instruction consisting of one step.
Intermediate
result
An instruction produces a visible inter-
mediate result.
"
Final result
There is a visible final result on com-
pletion of the instruction.
1.2
On the product
!
Observe all warning notices on products and ensure
they remain legible.
2. User information
2.1
Important notes
Important information on copyright, liability and warran-
ty provisions, as well as on equipment users and com-
pany obligations, can be found in the separate manual
"Important notes on and safety instructions for Bosch
Diesel Test Equipment". These instructions must be care-
fully studied prior to start-up, connection and operation
of the 1 687 010 496 and must always be heeded.
2.2
Safety instructions
All the pertinent safety instructions can be found in
the separate manual "Important notes on and safety
instructions for Bosch Diesel Test Equipment". These
instructions must be carefully studied prior to start-up,
connection and operation of the 1 687 010 496 and
must always be heeded.
2.3
General Instructions
These instructions are only valid in conjunction with the
instructions supplied for the:
R
EPS 815 injection pump test bench (1 689 979 672)
R
Continuous flow-rate measurement system
KMA 802/822 (1 689 979 674)
R
Tester set for common rail pumps CRS 845H
(1 689 979 863)
These instructions must also be kept together with and
forwarded together with the instructions listed above.
Содержание CB 28
Страница 2: ......