Bosch BSGL4000GB, Инструкция по эксплуатации

Страница: 14 / 20

14
Changing the dust bag and filters
Replacing the HEPA filter
If your vacuum cleaner is equipped with a HEPA filter, this should be
replaced once a year.
Open the dust bag compartment lid.
Release the Hepa filter by moving the locking lever in the direction of
the arrow and remove it from the vacuum cleaner.
Insert the new HEPA filter and clip into place.
CLICK!
Clean the motor protection filter by tapping it.
If it is very dirty, the motor protection filter should be rinsed out.
The filter must then be left to dry for at least 24 hours.
After cleaning, slide the motor protection filter into the vacuum cleaner
and close the dust bag compartment lid.
5100 003 184 A 30.11.2011 11:15 Uhr Seite 14