Before using for the first time
en
9
K
Before using for the first
time
Before us
ing for t
he first
time
Before you can use your new appliance, you must
make some settings.
Initial use
After connecting the appliance to the power or following
a power cut, the settings for initial use are shown on the
display. It may take a few seconds for the instruction to
appear.
Note:
You can change these settings at any time in the
basic settings.
~
"Basic settings" on page 14
Selecting the language
1.
Turn the rotary selector to set the required language.
2.
Press the
s
field to confirm.
The next setting appears.
Setting the time
1.
Set the time using the rotary selector.
2.
Press the
s
field to confirm.
A note appears in the display confirming that the initial
use has been completed.
1
Operating the appliance
Operating
the appl
iance
You have already learnt about the controls and how
they work. Now we will explain how to set your
appliance. You will learn about what happens when you
switch the appliance on and off, and how to select the
operating mode.
Switching the appliance on and off
Before you are able to set the appliance, you must
switch it on.
Note:
The timer can also be set when the appliance is
switched off. Some displays and notes remain visible in
the display after the appliance has been switched off.
Switch off your device when it is not being used. If no
settings are applied for a long time, the appliance
switches itself off automatically.
Switching on the appliance
Press the on/off button
ÿ
to switch on the appliance.
All touch fields light up red. The Bosch logo appears in
the display, followed by the maximum microwave
output.
The appliance is ready to use.
The
s
field lights up red.
You can find out how to set the operating modes in the
individual chapters.
Switching off the appliance
Press the on/off button
ÿ
to switch off the appliance.
Any functions that may be running are cancelled.
The time appears on the display.
Note:
You can set whether or not the time should be
displayed when the appliance is switched off in the
basic settings.