9
en
Initial use
Setting up the appliance
■ Remove any protective plastic film.
NOTICE:
Only use the appliance in a frost-free room.
If it has been transported or stored at tem-
peratures below 32°F, wait at least 3 hours
before initial use.
■
Take hold of the appliance door by the
recessed grip and open.
■ Remove the water tank, rinse it and fill it
with fresh water up to the “max” mark.
■
Replace the water tank and click into
place.
■ Remove the bean container, fill with
coffee beans and replace.
■
Set the power switch to
I
and close
the appliance door.
The appliance heats up and is rinsed.
The control panel is activated.
“Language”
appears.
■ Turn the control ring with your finger to
select the desired language and press the
[ Water hardness ]
field.
Note:
It is important to set the water hardness
correctly to enable the appliance to accu-
rately indicate when the descaling program
should be run. The preset water hardness
is level 4. If a water softener is installed in
the house, please set the water hardness to
level 3. You can also check the water hard-
ness by asking your local water supplier.
■
Use the enclosed test strip to determine
the water hardness. Briefly dip the test
strip in water and check the result after
one minute.
Level Water hardness
German (°dH) French (°fH)
1
2
3
4
1-7
8-14
15-21
22-30
1-13
14-25
26-38
39-54
■ Turn the control ring with your finger to
set the water hardness determined.
■
Press
[ Set-up complete ]
. The settings are
saved.
The appliance is ready to use as soon
as the drink images are shown and the
m
lights up.
The integrated fan switches on each time
a drink is dispensed and switches off again
after a few minutes.
Note:
When the appliance is used for the first time
after running a service program, or if it has
not been operated for a long period, the first
beverage will not have the full aroma.
When the fully automatic coffee machine
is first used, a suitable thick and stable
“crema” is only achieved after the first few
cups have been dispensed.
Switch off appliance
■
Press
I
.
The appliance rinses and switches to
energy saving mode.
Exception:
If only hot water is dispensed,
the appliance switches off without rinsing.
■
To switch the appliance off completely,
open the appliance door and set the
power switch to
h
.
NOTICE:
Do not press the power switch while the
appliance is in use.
Note:
The factory settings of the fully automatic
coffee machine are programmed for optimal
performance. The appliance switches auto-
matically to the energy saving mode after
a specified time and rinses (duration can
be set, see “Switch off after” in the section
“Menu”).
Note:
The appliance is equipped with a sensor.
If there is a milk container, this will be
correspondingly shown on the display when
switching to the energy saving mode. If
there is milk in the container, please store in
the fridge.
Содержание BCM8450UC
Страница 4: ...E Nr FD D 7 19 8 8a 11 4a 4b 4c 4d 21 5 4 9 12 10 17 13 20 7a 18 18a 16 16a 16b 6a 6b 6 6c 6d ...
Страница 5: ...E 15 14a 1 2 13 14 14b 2 1 ...
Страница 115: ......