Bosch B810-CHI, Руководство по установке

Страница: 22 / 96

22 en | RADION receiver SD RADION receiver SD
2020.05 | 13 | F.01U.261.834 Bosch Security Systems B.V.
Furthermore for UL hold up installations the internal reed switch
is to be disabled. The door window contact magnet will not be
operative. The transmitter if used for hold up installations shall
be dedicated to a holdup installation only. Hold up alarm
requires a UL Listed Automation System at the Central Station
to show distinction between a Hold Up Alarm and a regular
Burglar Alarm.
–
For UL installations, a 2.2 K ohm shall be installed.
– For UL installations, primary securement means shall be
screws.
RADION keyfobs
To comply with UL 1023, RADION keyfobs shall be programmed
with Forced Arm Bypass Max set to 0.
3.4 Installation
Use the anchors and screws to install the receiver in locations
accessible for future maintenance. Install the receiver onto a
wall.
For best performance, place the receiver in a central location
among the transmitters. For optimal communication results in
situations where there is a long distance between the
transmitting device and the system receiver, it might be
necessary to install repeaters.
Notice!
Install the receiver in a location away from metal objects. Metal
objects (duct work, wire mesh screens, boxes) reduce RF
range.
3.4.1 Configuration
RADION Wireless System operates on a radio frequency of
433.42 MHz.