Bosch AutoDome Junior HD VJR Series, Руководство по установке

Страница: 167 / 194

AutoDome Junior HD Configuring the AutoDome Junior HD | en 167
Bosch Security Systems, Inc. Installation Manual F.01U.275.803 | 6.0 | 2012.11
IP Address
Enter the desired IP address for the AutoDome 800 Series in
this field. The IP address must be valid for the network. A
typical IPv6 address may resemble the following example:
2001:db8 : : 52:1:1
Consult the network administrator for valid IPv6 address
construction.
Prefix Length
A typical IPv6 node address consists of a prefix and an interface
identifier (total 128 bits). The prefix is the part of the address
where the bits have fixed values or are the bits that define a
subnet.
Gateway Address
If you want the unit to establish a connection to a remote
location in a different subnet, enter the IP address of the
gateway here. Otherwise leave the box blank ( 0.0.0.0 ).
12.46.3 Detailed Settings
DNS server address
The AutoDome 800 Series is easier to access if the unit is listed
on a DNS server. If you wish, for example, to establish an
Internet connection to the AutoDome 800 Series, it is sufficient
to enter the name given to the unit on the DNS server as a URL
in the browser. Enter the IP address of the DNS server here.
Servers are supported for secure and dynamic DNS.
Video Transmission
If the unit is operated behind a firewall, TCP (HTTP port)
should be selected as the transfer protocol. For use in a local
network, select UDP .
CAUTION!
Multicast operation is only possible with the UDP protocol. The
TCP protocol does not support multicast connections.
The MTU value in UDP mode is 1,514 bytes.