Bosch AutoDome Easy II IP, Руководство по установке

Страница: 119 / 144

AutoDome Easy II IP Common User Commands (unlocked) | en 119
Bosch Security Systems, Inc. Installation Manual F.01U.164.576 | 2.0 | 2010.03
14.2 Setting Preset Shots
Preset shots are saved camera positions. Shots are saved as
scenes, therefore, the terms SHOT and SCENE are used
interchangeably.
To set a Shot:
1. Move the camera to the position you want to save.
2. Press SHOT-#-ENTER where # can be a number from 1 to
99 that identifies the camera position of the scene.
To view a Shot:

Press SHOT-#-ENTER where # is the number of the scene
position you want to view.
To store or clear a Shot:
1. Press SET-100-ENTER to access the Store/Clear Scene
Menu .
2. Follow the on-screen instructions.
14.3 Configuring Preposition Tours
A Preposition Tour automatically moves the camera through a
series of preset or saved shots.
The AutoDome Easy II has one (1) standard preset tour, two (2)
playback tours, and two (2) auto pan modes. Tour 1 is a
standard tour that moves the camera through a series of shots
in the sequence of shot number.
To start Preposition Tour:
1. Set a series of preset shots in the order that you want the
AutoDome Easy II to cycle through.
2. Press ON-8-ENTER to start the tour. The tour then cycles
through the series of shots until it is stopped.
To stop a Preposition Tour:

Press OFF-8-ENTER or move the joystick to stop either
type of tour.