Bosch ASCENTA, Руководство пользователя

Страница: 22 / 80

22
To remove the Large Object Trap/ Cylinder Filter Assembly:
Remove the bottom rack. 1.
Grasp the assembly and turn it counterclockwise 2.
- ¼ turn as shown below.
Lift out the assembly as shown below. 3.
Carefully examine the assembly. If you find debris in 4.
the Large Object Trap, turn it upside-down and gently
tap it on a surface such as a countertop to dislodge
and remove the debris.
Flush the Cylinder Filter clean by holding it under 5.
running water.
To avoid injury, do not reach into the large object
trap with your fingers. The large object trap could
contain sharp objects.
CAUTION
To reinstall the filter system:
Return the fine filter to its originally installed 1.
position.
Turn the locking nut clockwise 1/4 turn until it is 2.
locked. The arrow on the ring handle and the arrow
on the Fine Filter should point to each other.
Clean the Exterior Door Panel •
Colored Doors
Use only a soft cloth that is lightly dampened with soapy
water.
Stainless Steel Doors
Use a soft cloth with a non-abrasive cleaner (preferably
a liquid spray) made for cleaning stainless steel. For the
best results, apply the stainless steel cleaner to the cloth,
then wipe the surface.
Clean the Door Gasket •
Regularly clean the door gasket with a damp cloth to
remove food particles and other debris. Also clean the
door seal, located inside the dishwasher at the bottom of
the door.
Winterizing Your Dishwasher •
If your dishwasher will be unused for an extended period of
time in a location that experiences freezing temperatures
(e.g., in a holiday home or through a vacation period),
have your dishwasher winterized by an authorized service
center.