14
| English
F 016 L81 227 | (18.11.14)
Bosch Power Tools
Products sold in GB only
: Your prod-
uct is fitted with a BS 1363/A approved
electric plug with internal fuse (ASTA
approved to BS 1362).
If the plug is not suitable for your socket
outlets, it should be cut off and an ap-
propriate plug fitted in its place by an
authorised customer service agent.
The replacement plug should have the
same fuse rating as the original plug.
The severed plug must be disposed of
to avoid a possible shock hazard and
should never be inserted into a mains
socket elsewhere.
Products sold in AUS and NZ only
:
Use a residual current device (RCD)
with a rated residual current of 30 mA
or less.
Symbols
The following symbols are important for reading and under-
standing the operating instructions. Please take note of the
symbols and their meaning. The correct interpretation of the
symbols will help you to use the garden product in a better
and safer manner.
Intended Use
The machine is intended for the cutting of grass and weeds
under bushes, as well as on slopes and edges that can not be
reached with the lawn mower.
Intended use is related to operation within 0 °C and 40 °C
ambient temperature.
Technical Data
Symbol
Meaning
Wear protective gloves
Movement direction
Reaction direction
Weight
Switching On
Switching Off
Permitted action
Prohibited action
Audible noise
Accessories/Spare Parts
CLICK!
Cordless Trimmer
ART 23 EASYTRIM ACCU/
ART 2300 EASYTRIM ACCU
ART 26 EASYTRIM ACCU/
ART 2600 EASYTRIM ACCU
Article number
3 600 H78 H..
3 600 H78 J..
No-load speed
min
-1
9 500
9 000
Cutting diameter
cm
23
26
Weight according to EPTA-Procedure 01/2003
kg
1.9
2.0
Serial number
See serial number (type plate) on the machine
Battery
NiCd
NiCd
Article number
2 607 335 533
2 607 335 533
Rated voltage
V=
14.4
14.4
Capacity
Ah
1.5
1.5
Charging period (battery discharged)
min
250
250
Please observe the article number on the type plate of your garden product. The trade names of the individual garden products may vary.
OBJ_BUCH-2333-001.book Page 14 Tuesday, November 18, 2014 4:33 PM