en
Installation and connection
6
Before using your appliance for the first time
1.
Remove leaflets, adhesive tape and protective film.
2.
Clean the appliance.
Electrical connection
Caution!
Do not connect the appliance to electronic energy saver
plugs.
Note:
You can connect the appliance to mains-controlled
and sine-controlled inverters.
Mains-controlled inverters are used for photovoltaic
systems which are connected directly to the national grid.
Sine-controlled inverters must be used for isolated
applications. Isolated applications, e.g. on ships or in
mountain lodges, which are not connected directly to the
national grid.
1.
After installing the appliance, wait at least 1 hour
before connecting it to prevent damaging the
compressor.
2.
Connect the appliance via a correctly installed socket.
The socket must comply with the following data:
Outside Europe: Check whether the indicated current
type of the appliance corresponds with the values of
your power supply. Appliance specifications are on the
rating plate.
"Getting to know your appliance" on page 7
3.
Connect the appliance to a socket near the appliance.
The socket must be freely accessible even after the
appliance has been installed.
Socket with
220V ... 240 V
Conductor
50 Hz ... 60Hz
Fuse
10A ... 16 A
