-9-
Laser Receiver . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . LR8
Article number . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 3 601 K69 J11
Working range
1)
. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 15’-165’ (5-50 m)
Receiving angle . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 90°
Measuring accuracy
2)
– “Fine” adjustment . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .±1/32” (±1 mm)
– “Coarse” adjustment . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . ±1/8” (±3 mm)
Operating temperature . . . . . . . . . . . . . . . .14
°
F....+122
°
F (–10
°
C...+50
°
C)
Storage temperature . . . . . . . . . . . . . . . . . . -4
°
F...+158
°
F (–20
°
C...+70
°
C)
Max. altitude. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 6560 ft (2000 m)
Relative air humidity, max. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 90%
Pollution degree according IEC 61010
3)
. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 3
Batteries . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 2 x1.5V LR6 (AA)
Operating time, approx. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .30 h
Weight . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .0.33 lb (0.150 kg)
Degree of protection . . . . . . . . . . . . . . . IP 54 (dust and splash water protected)
Dimensions (length x width x height) . . . 2.9” x 1.1” x 5.4” (73 x 28 x 137 mm)
1) The working range can be decreased by unfavorable environmental
conditions (e.g. direct sun exposure).
2) The angular accuracy between the 45° laser line and the 90° laser line is
max. ±5/32 @ 30 ft (+/-0.4 mm/m).
3) Conductive pollution occurs, or dry, non-conductive pollution occurs
which becomes conductive due to condensation which is expected. In such
conditions, equipment is normally protected against exposure to direct
sunlight, precipitation, and full wind pressure, but neither temperature nor
humidity is controlled.
Please observe the article number on the type plate of your tool.
The trade names of the individual tools may vary.
The tool can be clearly identified with the serial number
14
on the type plate.
Technical Data
www.
GlobalTestSupply
.com
Find Quality Products Online at:
