-7-
Intended Use
The tool is intended for detecting pulsating line lasers.
Preparation
Inserting/Replacing the Battery
Alkaline batteries are recommended for the tool.
Pull the latch
16
of battery lid outward and open the battery lid
15
.
When inserting batteries, pay attention to the correct polarity.
When the battery low indicator
a
appears for the first time on the
display
6
, the measuring tool can still be operated for approx. 2 h.
Remove the batteries from the tool when not
using it for extended periods.
When storing
for extended periods, the batteries can corrode and discharge
themselves.
Use the tool, accessories, etc., in accordance with these in-
structions and in the manner intended for the particular type of
tool, taking into account the working conditions and the work
to be performed.
Use of the tool for operations different from
those intended could result in a hazardous situation.
Service
Have your tool serviced by a qualified repair person using only
identical replacement parts.
This will ensure that the safety of
the tool is maintained.
Develop a periodic maintenance schedule for tool. When clean-
ing a tool be careful not to disassemble any portion of the tool
since internal wires may be misplaced or pinched or may be
improperly mounted.
Certain cleaning agents such as gasoline,
carbon tetrachloride, ammonia, etc. may damage plastic parts.
SAVE THESE INSTRUCTIONS.
www.
GlobalTestSupply
.com
Find Quality Products Online at:
