Bosch 22-15-2061, Перевод оригинальной инструкции по эксплуатации

Страница: 261 / 299

MY22Z0a - 12_1.0_25.07.2022
260
Troubleshooting, fault clearance and repair
9.1.16.2 Rebounding too slowly
The rear frame damper does not rebound quickly
enough after a bump has been compensated and
is not in the required initial position when the
wheel hits the next bump. The rear frame damper
remains compressed during successive bumps,
thus reducing deflection and ground contact and
increasing hardness on the next impact. The rear
wheel bounces off the second bump since the rear
frame damper does not rebound quickly enough to
make contact with the ground and return to the
initial position again. The available deflection and
traction are reduced (blue line). The rear frame damper remains in a deflected
state after contact with the first bump. When the
rear wheel hits the second bump, the saddle
follows the path of the rear wheel instead of
remaining in a horizontal position. The available
deflection and potential absorption of bumps are
reduced, which causes instability and loss of
control during successive bumps (green line).
Figure 264: Rear frame damper rebounding too slowly
Solution
Figure 265: Position and shape of the rebound adjuster (red) depends on the model
 Turn rebound adjuster in an anti-clockwise
direction.
 Rebound damping is reduced. The rebound
speed is increased. Performance while riding
over bumps is improved.
2.5