BOS Suspension Factory Series, Руководство по обслуживанию

Страница: 15 / 32

15

Remove the old O-ring with a hook tool and replace with a new one
Be careful not to damage the anti-extrusion rings and piston guide
strips. Check that the o-ring is not rolled up.

Unscrew the compression block using a ratchet and a 24mm socket

Remove the compression block seals (the one on the block and the one
in the head) and replace them with new ones

Then clean the inside of the cylinder and canister properly with a clean cloth or a washing machine if
you have one available.

Clean the compression block, splitter piston and inflation cap properly with a clean cloth as well.

Place all the elements on your workbench before proceeding to the disassembly of the rod assembly.
Required tools :
- Hooking tool
Required tools :
- Ratchet / 24mm socket (Factory) / 32 socket (Factory-R)
Required tools :
- - Hooking tool