BOS Suspension Factory Series, Руководство по обслуживанию

Страница: 14 / 32

14

Remove the canister ring by pushing it with a flat screwdriver or
hooking tool. Position it at an angle to facilitate its disassembly.

Be careful not to scratch the inside of the canister during this
operation.

Screw the corkscrew on the inflation cap and pull it vertically to
extract the cap from the canister.

Remove the canister seal with a hook and loop tool and replace with
a new one.

Screw the separating piston extractor tool into the separating piston
and pull vertically until the piston is extracted from the canister
Make sure your shock absorber is properly locked in the vise to
avoid damaging it.
Requiered tools :
- Flat screwdriver / Hooking tool
Requiered tools :
- Corkscrew (150707-O-030)
Requiered tools :
- - Separating piston extractor tool (000019-O-031 and 000019-O-037)