Bort BRS-3000, Инструкция по эксплуатации

Страница: 8 / 36

8
ENGLISH GB
PLASTIC TUBE WELDING
MACHINE
APPOINTMENT
The pipe welding machine is designed for manual
welding of plastic pipes and fittings using the coupling
principle . Provides reliable welding by melting the
surface of the pipe material diffuse connection of the
material .
Subject to welding pipes made of plastic materials
pipes, including reinforced ones, intended for this type
and method of connection .
TECHNICAL SPECIFICATIONS (FIG. 1)
Power 2 000 W
Temperature mode 50 - 300 °С
Temperature regulation +
Heating time 10 min
Product weight 1,5 kg
Voltage / Current frequency 220 V / 50 Hz
Diameter of
nozzles
20 / 25 / 32 / 40 /
50 / 63 mm
Power cord length 1,5 m
APPLIANCE:
1 . Heating element;
2,3 . Control lamp;
4 . Two-key switch;
5 . Handle;
6 . Stand with clamp;
7 . temperature controller;
8 . Hole for attachments .
THE COMPLETE SET INCLUDES:
1 . Shears;
2 . Measuring tape;
3 . Nozzles (6 pcs);
4 . Screwdriver;
5 . Hex-nut wrench;
6 . Rack with screw clamp;
7 . Gloves;
8 . Сarrying case .
Product Life:
The service life of the product is 5 years .
Production date:
Is indicated on the packaging of the goods .
Shelf life:
Shelf life is not limited (subject to storage conditions) .
Storage conditions:
Products are stored in dry, ventilated warehouses at tem-
peratures from 0 ° C to +40 ° C with a relative humidity of
not more than 80% .
Transportation:
It is strongly prohibited dropping and any mechanical im-
pact on the packaging during transportation .
When unloading / loading, it is not allowed to use any
type of equipment that works on the principle of packing
clamping .
GENERAL POWER TOOL SAFETY WARNINGS
WARNING!
To reduce the risk of injury, the user must
read and understand the instruction manual .
Read all instructions . Failure to follow all instructions
listed below may result in electric shock, fire and/or se-
rious injury . The term ”power tool“ in all of the warnings
listed below refers to your mains operated (corded)
power tool or battery operated (cordless) power tool,
also machines and electric units . Only use the power
tool for the purpose for which it was intended, with the
due attention to the general safety and accident pre-
vention regulations .
!!! KEEP ALL SAFETY NOTES AND INSTRUCTIONS
FOR THE FUTURE !!!
A) Work area
• Keep work area clean and well lit . Cluttered and dark
areas invite accidents .
• Do not operate power tools in explosive atmos-
pheres, such as in the presence of flammable liquids,
gases or dust . Power tools create sparks which may
ignite the dust or fumes .
• Keep children and bystanders away while operating a
power tool . Distractions can cause you to lose control .
B) Electrical safety
• Power tool plugs must match the outlet . Never mod-
ify the plug in any way . Do not use any adapter plugs
with earthed (grounded) power tools . Unmodified
plugs and matching outlets will reduce risk of electric
shock . If the power tool comes with an earthed wire,
the plug may only be connected to an earthed re-
ceptacle . At work sites, in damp surroundings, in the
open or in the case of comparable types of use, only
operate the power tool off the mains using a 30 mA
fault current protected switch (FI breaker) .
• Avoid body contact with earthed or grounded surfac-