Bort 93416305, Руководство пользователя

Страница: 10 / 32

10
EXPLOITATION
When spraying water against a surface, maximum impact
is generated when the water strikes the surface “head on .”
However, this type of impact tends to cause dirt particles
to imbed in the surface, thereby preventing the desired
cleaning action .
The optimum angle for spraying water against a cleaning
surface if 45 degrees .
Spraying water against a surface at this angle provides for
the most beneficial impact force combined with efficient
removal of debris from the surface .
Another factor that determines the impact force of the
water is the distance from the spray nozzle to the cleaning
surface . The impact force of the water is increased as the
nozzle is moved closer to the surface .
DETERGENTS
The use of detergents can dramatically reduce cleaning
time and assist in the removal of difficult stains . Some de-
tergents have been customized for pressure washer use
on specific cleaning tasks . These detergents are approx-
imately as thick as water . The use of thicker detergents,
such as dish soap, will clog the chemical injection system
and prevent the application of the detergent .
The cleaning power of detergents comes from applying
them to a surface and giving the chemicals time to break
down the dirt and grime . Detergents work best when ap-
plied at low pressure .
The combination of chemical action and high pressure
rinsing is very effective . On vertical surfaces, apply the
detergent starting at the bottom and work your way up-
ward . This will prevent the detergent from sliding down
and causing streaks . High pressure rinsing should also
progress from the bottom to top . On particularly tough
stains, it may be necessary to use a brush in combination
with detergents and high pressure rinsing .
NOTE: Use only detergents formulated for
pressure washes .
WATER SUCKING FUNCTION
• Connect the hose to high pressure mashine and con-
nect it to the water tank;
• Turn on high pressure mashine;
• PUSH and keep the trigger of gun some time for filled
water pump;
• Lets release the trigger of gun and connect necessary
nozzle;
• High pressure mashineIS ready to work .
SERVICE & MAINTENANCE
Unplug the electric cable (power source) pri-
or to any maintenance or preparatory stor-
age operations.
Make sure that the machine is not live when carrying out
maintenance work on the motor .
To ensure good performance, check and clean the suction
and detergent filters after every 50 hours of operation .
Long periods of disuse may lead to the formation of lime
scale deposits . Working through the hole on the rear, RE-
LEASE the motor using a screwdriver (for models with this
feature) .
Then remove the screwdriver and proceed with the restart
operations .
Cleaning
Keep the ventilation slots of the machine clean to prevent
overheating of the engine . Clean the housing regularly
with a soft cloth, preferably every time it is used . Keep
the air vents free from dust and dirt . Remove stubborn
dirt with a soft rag moistened in soapy water . Do not use
any solvents such as petrol, alcohol, ammonia, etc . as such
substances can damage the plastic parts .
Lubrication
The appliance does not need any extra lubrication .
Storage and transportation
Keep the high pressure washer in well-ventilated dry
premises with temperature not going below +5ºC . Oper-
ate the cleaner with non-corrosive / non-toxic antifreeze
before storing for the winter .
DISPOSAL
Discarded electric appliances are recyclable and
should not be discarded in the domestic waste!
Please actively support us in conserving resources
and protecting the environment by returning this
appliance to the collection centres (if available) .
Made in China .