Bort 91276308, Руководство пользователя

Страница: 11 / 32

11
er connect to hot water supply – this will significantly
reduce life of the pump .
3 . Using detergent other than others brand may cause
damage to pump components (o-rings, etc .) .This also
applies to chemicals such as bleach, dish soap, etc .
4 . Never operate unit for more than one (1) minute with-
out spraying water . Resulting heat buildup will dam-
age pump .
5 . Before adjusting nozzle’s pressure (high-to-low or low-
to-high) release trigger . Failure to do so will reduce life
of o-rings in lance .
SERVICE & MAINTENANCE
WARNING!
Unplug the electric cable (power source) pri-
or to any maintenance or preparatory storage
operations . Make sure that the machine is not live when
carrying out maintenance work on the motor .
Cleaning
Keep the ventilation slots of the machine clean to pre-
vent overheating of the engine . Clean the housing reg-
ularly with a soft cloth, preferably every time it is used .
Keep the air vents free from dust and dirt . Remove stub-
born dirt with a soft rag moistened in soapy water . Do
not use any solvents such as petrol, alcohol, ammonia,
etc . as such substances can damage the plastic parts .
Lubrication
The appliance does not need any extra lubrication .
Storage and transportation
Keep the high pressure washer in well-ventilated dry
premises with temperature not going below +5ºC . Oper-
ate the cleaner with non-corrosive/non-toxic antifreeze
before storing for the winter .
Faults
If a fault arises through wear in an element, please con-
tact the service address shown on the warranty card . A
drawing of the spare parts that may be obtained is in-
cluded at the end of these operating instructions .
DISPOSAL
Discarded electric appliances are recyclable and
should not be discarded in the domestic waste!
Please actively support us in conserving resourc-
es and protecting the environment by returning
this appliance to the collection centres (if available) .
Made in China .