17
Charging
:
1.
Once the hand control has been inserted into the wall charger, a permanently lit yellow light
indicates that charging is ongoing. Preferably you should leave the Rise II to charge for a period of
4-5 hours or overnight.
2.
A yellow light blinking slowly (approx. 2 blink per second) indicates that “trickle charging” is
ongoing. This means that the software is “topping-up” in order charge the batteries to their
absolute maximum.
3.
A yellow light blinking quickly indicates either electronic default or that or that the software has
not had time to run a full security check. Remove the hand control from the wall charger and wait
approx. 20 seconds or until the yellow light is no longer blinking. Then insert the hand control
again. After a few seconds the yellow light should be either permanently lit (charging mode) or
blinking slowly (trickle charging mode). If fast blinking persists, contact an authorized dealer for
service inspection.
N.B: If the batteries are cold (below freezing) capacity is reduced significantly and you should give
them time to reach ambient temperature.
1
2
3
