BorMann PRO BBC8010, Руководство пользователя

Страница: 3 / 8

EN
WWW.BORMANNTOOLS.COM
3
Technical data
Capacity: 8000 mAH
Input: 15V/1A
Output: 1) 5V/1A USB, 5V/2A USB
2) 19V/3.5A for Laptops
3) LED Flashlight (On, Strobe, SOS)
4) 12V emergency Jump Start up
Starting Current: 200A
Peak Current: 400A
Lifetime: 1000 Cycles
* The manufacturer reserves the right to make minor changes to product design
and technical specifications without prior notice unless these changes significantly
affect the performance and safety of the products. The parts described / illustrated
in the pages of the manual that you hold in your hands may also concern other
models of the manufacturer's product line with similar features and may not be
included in the product you just acquired.
* Please note that our equipment has not been designed for use in commercial,
trade or industrial applications. Our warranty will be voided if the machine is used
in commercial, trade or industrial businesses or for equivalent purposes.
* To ensure the safety and reliability of the product and the warranty validity, all
repair, inspection, repair or replacement work, including maintenance and special
adjustments, must only be carried out by technicians of the authorized service de-
partment of the manufacturer.
Operating instructions
Charging the device
1. Plug the home adaptor into the universal socket.
2. Connect 15V 1A input port of Jump Starter to the other end of home adaptor.
Or
1. Plug the car adaptor into the socket of cigarette lighter.
2. Connect 15V 1A input port of Jump Starter to the other end of car adaptor.
For jump start of 12V vehicle
1. Make sure that the number of indicator light is not less than 3.
2. Connect the red battery clamp of jumper cable to the vehicle's positive (+) battery
terminal and connect the black battery clamp of jumper cable to the vehicle's negative
(-) battery terminal.
3. Plug the cord of jumper cable into the jump start socket.
4. Start the vehicle
5. When the vehicle starts, remove jumper cable from Jump Starter and disconnect red
and black clamps to the vehicle battery terminals within 30 seconds
6. Leave the vehicle's engine running.
Charging mobile phones or tablets
1. Plug the switch cable B to USB 5V 2A output port.
2. Select appropriate connector for your mobile phones or tablet and connect it to the
switch cable B and your mobile phone or tablet.
3. Press the switch button to charge.
Indicator lights
Press the switch to check the storage level of Jump Starter.
The indicator will flash one by one during the period of charging.
Different number of solid indicators show different storage level of Jump Starter.
All indicators light up when the charging is paused or completed.
Indicator
lights
Unlit 5 flashing 1 solid 2 solid 3 solid 4 solid 5 solid
Battery
capacity
0% 10% 20% 40% 60% 80% 100%
Charging/power supply to Notebooks
Plug the switch cable to USB 19V 3.5A output port.
2. Select appropriate connector for your Notebook and connect it to the switch cable A
and your Notebook
3. Press the switch button to charge/power supply.