BorMann PRO BBC8010, Руководство пользователя

Страница: 2 / 8

EN
WWW.BORMANNTOOLS.COM
2
Safety instructions
1. DO remove the product from the vehicle within 30s.
2. DO NOT connect the two clamps. Otherwise, it may be dangerous!
3. DO NOT disassemble the host. Otherwise,it may be dangerous!
4. In the process of charging, when the indicator lights are fully lit, the charging plug should be pulled out. For avoiding of overcharging, which will shorten the
battery's life.
Always take care when using the appliance.
This appliance is not intended for use by young or infirm persons without supervision.
Do not use as a toy.
Do not allow the appliance to become wet.
Do not immerse the appliance in water.
Do not operate the appliance in explosive atmospheres such as in the presence of flammable liquids,gases or dust.
Do not modify or disassemble Jump Starter. Only a repair technician may repair this unit.
Do not expose the appliance to heat.
Do not store in locations where the temperature may exceed 700 C.
Charge only at ambient temperatures between -20 0 C-60 0 C.
Charge only using the proper charger designed for this appliance.
Under extreme conditions, battery leakage may occur. Carefully wipe the liquid off using a cloth and avoid skin contact when you notice liquid on the batteries.
In case of skin or eye contact, rinse immediately with clean water and seek medical attention
At the end of their useful life,discard the appliance with due care for our environment.
Keep away from children.
Toxic And Harmful Substances
Composition and amount of toxic and harmful substance in Jump Starter
Pb Hg Cd Cr (Vi) PBB
0 0 0 0 0
0: indicates all homogeneous material’s hazardous substances content are below the MCV limit spec-
ified in the standard 2011/65/EU (RoHS).
Description of main parts
1. Home adaptor
2. 15V 1A input port
3. 12V 2A output port
4. USB 5V 2A output port
5. Switch
6. Indicator light
7. 19V 3,5A output port
8. Jump start socket
9. LED illumination
1
2
3.
7.
Jumper cable with
clamps
For 12V vehicle
products
Switch cable A Switch cable B
9.
8.
4.
5
6.