BorMann 049913, Руководство пользователя

Страница: 4 / 14

EN
WWW.NIKOLAOUTOOLS.GR
4
PARTS NO DESCRIPTION Q’TY
001 HYDRAULIC PUMP ASS’Y 1
002 LINK 1
003 PIN 1
004 COTTER PIN 1
005 SPINDLE, RELEASE VALVE 1
006 PIN 1
006 -1 CLIP 1
007 LINK 1
008 PIN 1
009 SNAP – RING “C” 2
010 SPINDLE, PUMP PISTON 1
011 PIN 1
012 SNAP – RING “C” 2
013A FRAME, RH KIT 1
023A ADJUSTING SCREWS ASS’Y 2
026A CASTER FORK ASS’Y 2
029 BALL BEARING 2
032 NUT M12 2
033 NUT M10 2
034 FRONT SPINDLE 1
035 SPACING COLLAR 2
036 WASHER 2
037 BUSH, FRONT WHEEL 2
038 FRONT WHEEL 2
039 WASHER 2
040 NUT M20 2
041 LIFTING ARM, STOP ROD 1
PARTS NO DESCRIPTION Q’TY
042 WASHER 2
043 NUT M16 2
044A FRAME, LH KIT 1
049 WASHER 6
050 BOLT M10 x 16 2
051 RETURN SPRING 1
052 BACK LIFTING ARM 1
053 LIFTING ARM SPINDLE 1
054 BOLT 1
055 BUSH 4
056 BOLT M12 x 65 4
057 WASHER 8
058 NUT M12 8
059 FRONT LIFTING ARM 1
060 PLATFORM 1
061 BUSH 4
063 BOLT M12 x 40 4
064 VICE 1
065 BOLT M10 x 25 2
066 SLIDING PLATE 1
067 GUARDED PLATE 1
068 BOLT M8 x 20 2
P23 NUT M8 2
069 LEADING PLATE 1
070 COTTER PIN 2
071 FOOT PEDAL, LIFT 1
072 FOOT PEDAL, RELEASE 1
073 SET SPINDLE 1
074 SPRING WASHER 10
CAUTIONS:
1.The vented plug (p37) can be used for fuelling or releasing.
2. Before operation, be sure to fix the Motorcycle Lift on floor with Adjusting Screws (023A) to prevent the Lift from sliding during
operation.
3. After placing the motorcycle onto the platform, be sure to use the vice (064) to lock front wheel of the motorcycle to prevent it
from slipping, tilting over, or falling.
4. After lifting, be sure to insert Set Spindle (073) into Front Lifting Arm to prevent from unintentional slow lowering.
5. To mark nominated capacity as 400kgs, be sure to load under its limited capacity installed with Safety Valve to prevent over-
load.
PARTS LIST
* The manufacturer reserves the right to make minor changes to product design and technical specifications without prior notice unless these chang -
es significantly affect the performance and safety of the products. The parts described / illustrated in the pages of the manual that you hold in your
hands may also concern other models of the manufacturer's product line with similar features and may not be included in the product you just acquired.
* To ensure the safety and reliability of the product and the warranty validity, all repair, inspection, repair or replacement work, includ -
ng maintenance and special adjustments, must only be carried out by technicians of the authorized service department of the manufacturer
* Always use the product with the supplied equipment. Operation of the product with non-provided equipment may cause malfunctions or even seri -
ous injury or death. The manufacturer and the importer shall not be liable for injuries and damages resulting from the use of non-conforming equipment
.
Fig. 4