BorMann 036364, Руководство пользователя

Страница: 9 / 22

EN
WWW.BORMANNTOOLS.COM
9
1. Shaft lock, 2. Hex wrench, 3. Loosen, 4. Tighten
1. Hex bolt 2. Outer flange 3. Circular saw blade 4. Inner flange
1. Upper guard, 2. Lower guard
3. Base, 4. Stopper, 5. Open, 6. Close
To install the circular saw blade, follow the removal procedure in reverse.
The inner flange has a certain diameter protrusion on one side of it and a different diameter
protrusion on the other side.
Choose a correct side on which protrusion fits into the saw blade hole perfectly.
Mount the inner flange onto the mounting shaft so that the correct side of protrusion on the
inner flange faces outward and then place saw blade and outer flange.
WARNING: BE SURE TO TIGHTEN THE HEX BOLT CLOCKWISE SECURELY.
Also be careful not to tighten the bolt forcibly. Slipping your hand from the hex wrench can
cause a personal injury.
WARNING: Make sure that the protrusion "a" on the inner flange that is positioned outside
fits into the saw blade hole "a" perfectly. Mounting the blade on the wrong side can result in
the dangerous vibration.
Blade guard cleaning
When changing the circular saw blade, make sure to also clean the upper and lower blade guards of accumulated sawdust as discussed in the Maintenance
section. Such efforts do not replace the need to check lower guard operation before each use.
WARNING: This tool is intended to cut wood products. With appropriate Bormann genuine circular saw blades, following materials can also be sawed:
Checking blade guard function
Set the bevel angle to 0°, and then retract the lower guard manually to the end and release it.
The lower guard is properly functioning, if:
- it is retracted above the base without any hindrance and;
- it automatically returns and contacts with the stopper.