BorMann 018254, Руководство пользователя

Страница: 5 / 17

5
www.BormannTools.com
CHARGING STEPS
STEP 1: DIAGNOSIS (Check if battery has connected with the charger and also check battery voltage)
STEP 2: DESULPHATION (If battery voltage is too low, programs automatically generate pulsing current to remove sulphate)
STEP 3: ANALYSE (Check if the battery voltage reaches to the threshold after desulphation, and charging begins if the battery
voltage is OK)
STEP 4: SOFT START
(Charge with echelon constant current)
STEP 5: BULK (Charge with constant maximum current until battery voltage is reached to the threshold)
STEP 6: ABSORPTION (Provide gradually declining current charge for maximum battery voltage)
STEP 7: ANALYSE (Test if the battery can hold charge)
STEP 8: MAINTENANCE (Continuously monitor the battery, and charging current will intelligently adapt to the variable
battery voltage)
NOTICE:
After full charging cycle, use this battery to start matched vehicle’s engine. If engine cannot be activated (exclude
the problem of vehicle itself), it indicates this battery has declined storage capacity and need to be replaced.
CHARGING TIME
Different battery capacity, residual voltage and charging current would affect the charging time. Following data is only for
reference (under the condition of fully discharging).
Battery Size /Ah
Approx. Time to Charge in Hours
2A 6A 10A 15A
4 2 ---------- ---------- ----------
14 7 2.3 ---------- ----------
25 12.5 4.2 2.5 ----------
30 15 5 3 2
40 20 6.7 4 2.7
50 25 8.3 5 3.4
60 30 10 6 4
100 ---------- 16.7 10 6.7
120 ---------- 20 12 8
180 ---------- 30 18 12
230 ---------- 38.3 23 15.3
300 ---------- ---------- 30 20
ERROR LIGHT
When ERROR light is on, it means the charger detects invisible fault. Therefore, the user should solve the fault before use. If
the user could not solve problems, please consult the professional person.
The reasons may include the followings:
1) The battery voltage is rather low.
2) Reverse connection.
3) Overload.
4) When with buzzer sound, it indicates the temperature inside charger is too high. After the internal temperature reduces,
the charger will automatically start charging again.