BorMann 018254, Руководство пользователя

Страница: 3 / 17

3
www.BormannTools.com
1) The BBC2000 is designed for charging all types of 12V lead-acid, including WET (Flooded), GEL, MF (Maintenance-Free),
EFB (Enhanced Flooded Battery), AGM (Absorbed Glass Mat) batteries. It is suitable for charging battery capacities from 2 to
400 Amp-Hours and maintaining all battery sizes.
2) Built-in intelligent microprocessor makes charging faster, easier and safer.
3) This charger has safety features, including spark proof, protection for reverse polarity, short circuit, overcurrent,
overcharge and overheat.
4) Auto-memory: after power on, the display window of charger will show the last selected mode (except BOOST mode). The
charger will enter charging mode in 5 seconds around.
5) When the CHARGE light is on, it is on charging; when the CHARGE light is off and FULL light is on, the charging is
completed. But do NOT break the connection immediately. It will automatically switches from full charge to maintenance
status to maintain batteries during prolonged periods of storage.
6) It shows present voltage when VOLTAGE button is pressed.
7) Following is the charger’s technical specification:
Technical Data
Input: 220-240VAC, 50/60Hz, 2.5A
，
350W
MAX Output: 12VDC, 2/6/10/15A; 12VDC, 20A, 300s (Boost)
Battery capacity: 2-400AH (12V)
Lowest Chargeable Voltage: 3V
Supply Mode: 13.6V 7A
（
with built-in 12V cigarette lighter outlet
）
Automatically detect 6V/12V battery or selected by manual within starting 10s
Digital display detailed error codes to remind the abnormal processes
Charger Type: 8 steps, Full-automatic
Charging Cycle Battery Types: All type of 12V lead-acid batteries (WET/MF/CA/EFB/GEL/AGM)
Housing protection: IP20
* The manufacturer reserves the right to make minor changes to product design and technical specifications without prior
notice unless these changes significantly affect the performance and safety of the products. The parts described / illustrated
in the pages of the manual that you hold in your hands may also concern other models of the manufacturer's product line
with similar features and may not be included in the product you just acquired.
* Please note that our equipment has not been designed for use in commercial, trade or industrial applications. Our warranty
will be voided if the machine is used in commercial, trade or industrial businesses or for equivalent purposes.
* To ensure the safety and reliability of the product and the warranty validity, all repair, inspection, repair or replacement
work, including maintenance and special adjustments, must only be carried out by technicians of the authorized service
department of the manufacturer.