BORK C806, Руководство пользователя

Страница: 13 / 19

22 23
Problem Possible cause Troubleshooting
The coffee is poured out too quickly, espresso is made
without any foam
Too coarse coffee grind
Adjust the degree of grinding. It is recommended to begin from the 10 setting.
If you are using ready-made ground coffee, then it is necessary to make sure that the
grind is suitable for automatic espresso coffee stations.
Not enough ground coffee in the portafilter Apply the automatic dosing function
The ground coffee is not tamped enough
Use the automatic dosing function and press the ground coffee with a tamper.
The grinder safety valve has been activated
Portafilter overflow was registered during supply of
the ground coffee from the channel
Remove excess coffee from the portafilter and coffee grinder container
Loud continuous noise of the coffee station pump The water container is empty or was installed
incorrectly Fill the container to the required mark and install it into the coffee station until it is
locked.
Problem Possible cause Troubleshooting
The coffee station does not respond to button presses
and knobs activation
Overheating of the pump or the grinder
Shut down the coffee station, unplug it and let it cool for 30–60 minutes
Coffee overflow from the portafilter
The portafilter was installed in the cooking unit
incorrectly. Install the portafilter into the cooking unit, aligning the handle with the INSERT
inscription, and turn it right in the LOCK direction until it is locked
Excess ground coffee on the filter rim Remove excess ground coffee from the portafilter rim
The installed portafilter type does not match the
volume of made coffee Use a smaller portafilter for making of 1 cup of coffee, a larger one - for making of 2
cups.
Too much ground coffee in the portafilter. Apply the automatic dosing function
Ground coffee is pressed too tight Press coffee with less pressure using a tamper